Morbark 20 - Page 29

Operator’s Manual, Morbark Integrated Control System—Model 20 Chipper
29
Performance Adjustment Pages
Pressing the “F1” button will display the “Modules” information page. This page dis-
plays the status of the various modules connected to the Machine.
Contained within this page:
Module
MD3 (Start Panel)
Engine ECM
LOR Receiver
J1939 Keypad
LOR Tether
Pressing the “F3” button will display the various logs or error events that are stored on
the system.
Press the “Up / Down” buttons to navigate through the logs. 1.
Press the “OK” button to view the log. 2.
While viewing a log:
Press the “F2” button to change the “Sort order” of the logs1.
Press the “F3” button to toggle the display of the date and time2.
Press the “F4” button to toggle between showing individual lines or pages. 3.
Contained within this page:
Log File
System Log
Engine Log