Panorama Exposures
Open and Closed Mouth Exposures
Check that the Ready LED (green) on the patient frame,
operation panel, or control box is on.
Mouth Closed Exposure (First Exposure)
1. Pick up the handswitch and hold down the emission button.
The arm will go to its starting position, start to rotate and
exposures will be made of the left and right sides. During
X-ray emission, the yellow Emission LED on the control
box will light up and an audible signal will sound. Release
the emission button when the arm stops rotating.
• Always leave the X-ray booth, and press the
emission button outside of it.
• In case of an emergency, release the emission
button; this will completely stop the unit.
2. Have the patient stand still and maintain a good posture.
Press the Ready key on the patient frame or the arm
operation panel, or press the emission button.
The arm will go back to its starting position.
Warn the patient not to move during emission (while the
melody is sounding). If the patient moves, he could be
hit by the arm or the image might be ruined.
To Next Page
Loading...
Need help?
General
