To Next PageTo Next Page
Need help?Do you have a question about the Motec SDL3 and is the answer not in the manual?
General| Brightness | 1000 cd/m² |
|---|---|
| Communication Protocols | CAN, RS232 |
| Data Logging | Yes |
| Interface | Touchscreen |
| Protection Rating | IP67 |
| Inputs | Analog, Digital |
| Outputs | Analog, Digital |
| Operating Temperature | -20 to +70 °C |
| Storage Temperature | -40°C to 85°C (-40°F to 185°F) |
| Display | TFT Color Display |
Overview of the SDL3 Dash Logger's capabilities and optional upgrades.
Explains how the Dash Logger integrates with ECUs and other devices.
Lists common devices like ECUs, sensors, and expanders compatible with the Dash Logger.
Provides guidance on physically installing the Dash Logger and connecting its wiring.
Details how to connect various peripheral devices to the Dash Logger.
Details the process for installing Dash Manager and i2 Data Analysis software.
Explains the physical and software steps required to establish PC communication.
Outlines the recommended order for setting up Dash Logger configurations.
Explains how to create, open, save, and manage configuration files.
Explains how channels are used to convey information within the Dash Logger system.
Covers the process of configuring inputs, outputs, and communication ports.
Details how to set up special and general purpose calculations.
Describes how to configure the Dash Logger's display modes and elements.
Details the procedure for downloading logged data from the Dash Logger to a PC.
Explains how to transfer configuration files between the PC and the Dash Logger.
Explains methods for monitoring channels, simulating, and testing the Dash Logger.
Covers matching software/firmware versions and updating the Dash Logger.
Lists the technical specifications of the Dash Logger, including logging, display, and I/O.
Provides detailed input and output characteristics for various sensor types.
A comprehensive list of all pins on the 37-pin connector and their functions.
Contains essential information about connectors, wire specifications, and crimping tools.
Illustrates wiring methods for connecting the Dash Logger to different MoTeC ECUs via RS232.
Explains common communication error codes for RS232 and CAN, aiding in troubleshooting.
Lists keyboard shortcuts to improve navigation and efficiency within the Dash Manager software.
