Motec SDL3 - Appendices; Specifications

MoTeC Appendices 37
Appendices
Specifications
Specifications listed as optional are available as upgrades to customise and
grow your system. These additional features are activated through a simple
password system, at any time when you need it. An overview of the
upgrades can be found in Dash Logger Upgrades
.
Logging
• Optional 16 MB or 120 MB logging memory
• Logging rates up to 500 samples per second
• Fast Ethernet download
Display
• 70 segment bar graph
• 13 digit alphanumeric text bar
• 48 user-defined, scrollable message lines with programmable overrides
• 3 programmable 'pages' for Practice, Warm-Up and Race
Inputs
• 8 x Analogue voltage inputs, some are high resolution inputs
• 4 x Analogue temperature inputs
• 2 x Digital inputs
• 4 x Speed inputs with voltage measuring capability
• Compatible with up to two E888 expanders (8 Thermocouples only)
Outputs
• 4 x PWM, digital or switched outputs
Internal Sensors
• 4 x PWM, digital or switched outputs
• Dash temperature sensor
• Sensor supply voltage
• Battery voltage
3-axis accelerometer, detection range: +/- 5G