EasyManua.ls Logo

Motec SDL3 - Page 42

Motec SDL3
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
38 Appendices
Communications
• 2 x CAN with individually programmable CAN bus speeds
o Maximum data range 1 Mbit/sec
o Recommended terminating impedance 100 ohm
• 1 x RS232
Physical
• Dimensions 180 x 91 x 18 mm excluding connector
• Weight 385 g
• 1 x 37 pin Autosport connector
Power Supply
• Operating voltage: 8 to 32 volt DC
• Operating current: 0.15 ampere typical (excluding sensor currents)
• Reverse Battery protection
• Battery Transient protection
Operating Temperature
• Internal Temperature Range -10 to 80 °C
• Ambient Temperature Range -10 to 70 °C
Sensor Supply Current
• 5 V Sensor supply: 0.2 ampere maximum
• 8 V Sensor supply: 0.3 ampere maximum