26 Configuration
Track Map
For the i2 Data Analysis software to plot a track map, either a GPS should be
connected or a number of separate sensors that will provide the required
information.
Track Map using GPS
Ensure GPS Latitude and GPS Longitude are logged.
Track Map using Sensors
The following sensors are required and must be logged:
• Lateral G force (internal sensor)
• Wheel Speed
• Lap Beacon (the ‘Beacon’ Channel must be logged)
• Optionally Longitudinal G force (internal sensor)
A Longitudinal G force sensor should be used if the vehicle has only
one wheel speed sensor. This allows the analysis software to eliminate
wheel lockups which is essential when creating or using a track map.
To Next Page
Loading...
