Motec SDL3 - Page 63

MoTeC Appendices 59
Tasks :
One or more of the following may be specified.
-l
(Optional)
Perform a “Get Logged Data” operation.
-e
(Optional)
Perform a “Get Engine Log” operation.
-t
(Optional)
Perform a “Get Tell-tale Values” operation.
-p
(Optional)
Perform a “Print Summary” operation.
Note: The configuration file must be specified using a fully qualified path
including the file extension.
(e.g. -p "c:\motec\dash\config\bathurst.d30")
Note: There must be a space between -p and configuration file name.
-s
(Optional)
Perform a “Send Configuration” operation.
Note: The configuration file must be specified using a fully qualified path
including the file extension.
(e.g. -s "c:\motec\dash\config\bathurst.d30")
Note: There must be a space between -s and configuration file name.
-u
(Optional)
Perform an “Upgrade Dash Version” operation.