3.7.2
Terminating Calibration or Reconditioning Manually
At any time during IMPRES 2 or IMPRES battery discharge (steady amber), you can terminate calibration or
reconditioning.
Procedure:
1. Remove the battery from the charger pocket.
2. Within 5 seconds, reinsert the battery into the charger pocket.
Result: Battery discharge immediately terminates, and normal battery charging starts. The LED indicates
charge status.
MN002407A01-AK
Chapter 3: IMPRES 2 and IMPRES Batteries and Chargers
21
To Next Page
Loading...
