Status Charger Display LED Indicator
● Battery is unknown or
Nickel.
● An unknown condition
is preventing the battery
from being discharged.
● Charging is completed be-
fore the Ship Lithium goal
is reached.
● The charger pocket is a
special type.
CANNOT SHIP LI
OR
CANNOT DISCHARGE
FOR LI SHIPMENT
OR
SHIP INCOMPLETE
Low Capacity:yy%
OR
RADIO POCKET
CANNOT SHIP LI
OR
CHARGING POCKET
CANNOT SHIP LI
Standby
● Battery is waiting to rapid
charge.
● Battery is too hot, too
cold, or low voltage.
● Charger is too hot.
WARNING:
HOT BATTERY
WAITING TO CHRGE
OR
COLD BATTERY
WAITING TO CHRGE
OR
VERY LOW BATTERY
WAITING TO CHRGE
OR
HOT CHARGER
WAITING TO CHRGE
Flashing amber
NOTE:
● The following messages are introduced in software version V1.05:
○ Ship LI Discharge, xxx% Rated Capacity
○ Ship LI Charge, xxx% Rated Capacity
○ LI Ready to Ship, xx% Rated Capacity
○ Cannot Discharge, for LI Shipment
○ Ship Incomplete, Low Capacity:yy%
● The following messages are introduced in software version V1.11.01:
○ Wrong Batt Type, Cannot Ship LI
○ Radio Pocket, Cannot Ship LI
○ Charging Pocket, Cannot Ship LI
MN002407A01-AK
Chapter 6: Preparation for Lithium-Ion Battery Shipment
38
To Next Page
Loading...
