4.9.10.1
Enabling or Disabling Energy Economy
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup→Energy Economy→EE Selection.
3 Select one of the following options:
• On – Activates Energy Economy feature.
• Off – Deactivates Energy Economy feature.
4.9.10.2
Viewing the Energy Economy Status
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup→Energy Economy→EE Status.
3 The Energy Economy status is displayed as:
• Energy Ecnmy Is Supported By System
• Energy Economy Is Currently Not Supported By System
4.9.11
Transmission Power Class
NOTE: This is a Software Selling Feature.
Transmission Power feature enables your radio to choose whether to transmit with Class 3, Class 3L
or Class 4. The RF Power icon indicates when the radio uses this feature.
NOTE: Class 3 only available for Sales Model Number H63PCH6TZ8BN.
4.9.11.1
Selecting RF Power
When and where to use: Use this procedure when you are entering the area that requires higher
signal strength.
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup→RF Power.
3 Select one of the following options:
• Hi RF Power – Activates this feature.
• Normal RF Pwr – Deactivates this feature.
NOTE:
• Changing RF Power Class to Normal RF Pwr during calls may result in dropping the
call. The power level may be not sufficient to sustain the transmission.
• Battery consumption is higher when Hi RF Power is selected.
MN001489A01-BR
Chapter 4 : Main Menu
107
To Next Page
Loading...
