2.1.2
Inserting the SIM Card
NOTE: MTP3500 800MHz and MTP3550 800 MHz are not fitted with a SIM latch.
Prerequisites: Turn off your radio before inserting the SIM card.
Procedure:
1 Remove the battery.
2 Open a plastic SIM card cover.
3 Slide a SIM card latch towards the bottom of the radio and lift the latch.
4 Place the SIM card in a socket with the contact area facing down. Pay attention to the correct
position of the notched corner.
5 Close the SIM card latch and slide it towards the top of the radio.
6 Close the plastic SIM card cover.
7 Replace the battery.
MN001489A01-BR
Chapter 2 : Getting Started
22
To Next Page
Loading...
