3 Radio prompts for the Old Code.
NOTE:
To increase security, set your own PIN code. By default the PIN code are all zeros
(depending on the length of the PIN code). For radios with general PIN authentication,
the PIN length is a fixed 4-digit code. For radios with BSI PIN authentication, the PIN
length is configurable by your service provider up to a maximum of 8-digit code.
BSI is only applicable for sales model number H63PCH6TZ8AN.
4 If the entered code matches the old code, radio prompts for the new code twice.
Your radio displays Code Accepted.
4.8.2
Setting Keypad Lock
The keypad lock/unlock can be invoked from the radio menu, or by using a predefined menu shortcut.
By default, the Power and Emergency buttons are always operative when the keypad is locked.
Procedure:
1 To unlock, perform one of the following actions:
• Press Menu→*.
2 To lock, press Menu and select Security→Keylock Setup→Lock Keypad.
4.8.2.1
Keypad Lock Notification
When the keypad is locked, your service provider can configure one of the following instructions:
None
No notification is displayed.
Notification Only
Keys Locked is displayed.
Notification and Instruction
Press Menu * to lock/unlock keypad is displayed.
4.8.2.2
Setting Automatic Keylock Delay
Procedure:
1 From the home screen, press the Menu key.
2 Select Security→Keylock Setup→Delay.
3 Use Up and Down Navigation keys to change the minutes and press Done.
4.8.2.3
Setting Keylock on Startup
Procedure:
1 From the home screen, press the Menu key.
2 Select Security→Keylock Setup→Start Locked.
3 Select On or Off.
MN001489A01-BR
Chapter 4 : Main Menu
90
To Next Page
Loading...
Need help?
General
