4.9.12
Accessory (Accry) Setup
You can connect IMPRES, CORE, Other, or Secondary accessories to the radio side connector.
If you connect an IMPRES accessory, the radio detects and recognizes the accessory automatically.
If you connect a CORE, Other (for example, a third-party accessory), or Secondary accessory (for
example, an earpiece connected to an RSM), the radio may detect the connection but manual
selection is required at the Accry Setup menu.
The Accry Setup menu contains the supported accessories, represented by their Model Number as
defined by the related Audio Device Descriptor (ADD). ADD is a set of parameters in the radio that
defines the audio settings, such as gains and filters settings, for each accessory.
IMPORTANT: Do not connect RSMs to both connectors at the same time. To ensure correct
connection, do not press any RSM buttons when connecting the RSM to the radio.
4.9.12.1
Selecting CORE/Other/Secondary Accessories
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup→Accry Setup.
3 Select one of the following options:
• CORE RSM/PHF – Select an accessory from the list of the CORE accessories.
• CORE Earpiece – Select an earpiece from the list of the CORE accessories.
• RSM Earpiece – Specify if the accessory is connected to the RSM.
• Bluetooth Headset – Select an accessory from the list of available Bluetooth headsets.
4.9.13
Book On
This menu item allows you to edit RUA/RUI feature settings to automatically accept or reject book on
requests.
4.9.14
Rotary Knob
This menu item allows you to set all the related functionality of the Volume Knob and Talkgroup
Knob.
4.9.14.1
Setting Rotary Lock
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup→Rotary Knob→Rotary Lock.
3 Select one of the following options:
• Locked – Locks Volume Knob and/or Talkgroup Knob.
• Unlocked – Unlocks the Volume Knob and Talkgroup Knob.
MN001489A01-BR
Chapter 4 : Main Menu
108
To Next Page
Loading...
