EasyManua.ls Logo

Motorola solutions MTP3550 - Networks; Selecting Network Operation Mode

Motorola solutions MTP3550
158 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4.16
Networks
This is a Software Selling Feature. This menu item allows you to switch between the radio operation
modes.
4.16.1
Selecting Network Operation Mode
Procedure:
1 From the home screen, press the Menu key.
2 Select Networks.
3 Select one of the following options:
Network Sel – Selects the network to which the radio is allowed to register.
Trunked Mode – Switches to the mode using infrastructure.
Direct Mode – Switches to the mode without using infrastructure.
TXI Mode – Select Activate to stop sending any radio transmission.
NOTE: If the radio is in TXI Mode, it is not possible to switch from Direct Mode to
Trunked Mode.
Automatic DMO - Enable or Disable Automatic DMO.
NOTE:
When the radio enters Automatic DMO through a gateway, the radio does not support
Private Calls.
Automatic DMO is available only for sales model number H63PC6TZ8BN.
The first two prefixes in front of the sales model number depicts the region as listed:
AZ = Asia Pacific/Latin America Central Region (APAC/LACR)
AN = Australia and New Zealand (ANZ)
MD = Europe, Middle East, and Africa (EMEA)
TG Net Sel – Selects one or multiple networks determined by the selected talkgroup.
4.16.2
Network Select
This sub-menu item allows you to select a network to register your radio. Network Sel is available only
in TMO or Gateway mode, otherwise your radio display Service Restricted message.
4.16.2.1
Selecting Your Network
Procedure:
1 From the home screen, press the Menu key.
2 Select NetworksNetwork SelHome Only.
Your radio registers to the home network.
MN001489A01-BR
Chapter 4 : Main Menu
121

Table of Contents

Related product manuals