Indoor Location is used to track radio location while the radio is indoors. When Indoor Location is
activated, your radio receives beacon information from various dedicated beacons within the range
of the radio. The radio then sends the information within a Location Information Protocol message to
the Switching and Management Infrastructure, and a mapping application decodes the information to
calculate the location of the radio.
Procedure:
1 From the home screen, press the Menu key.
2 Select Bluetooth→Indoor Location.
3 Select Change.
4 Select On or Off to activate or deactivate Indoor Location.
Your radio is now able to detect Bluetooth location beacons when Indoor Location is activated.
NOTE: The use of the Indoor Location feature may have a negligible impact on other Bluetooth
functions on your radio.
4.5.6.1
Viewing Detected Beacons
Prerequisites: Turn on Indoor Location. If Indoor Location is turned off, the screen displays Service
Restricted.
Procedure:
1 From the home screen, press the Menu key.
2 Select Bluetooth→Indoor Location.
3 Select Beacons Found.
4 Select the preferred beacon.
The screen displays details of the beacon.
4.5.7
Connecting Firearms Devices
Prerequisites: Only pre-approved firearms devices can be used. The service provider is responsible
for configuring the radio to work with specific devices. See Add Bluetooth Devices on page 130.
When and where to use: To select a firearm sensor device for Bluetooth connection.
Procedure:
1 From the home screen, press the Menu key.
2 Select Bluetooth→Firearms.
MN001489A01-BR
Chapter 4 : Main Menu
87
To Next Page
Loading...
