4.9.14.5
Setting Rotary Knob Talkgroup Selection
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup→Rotary Knob→Confirm TG Sel..
3 Select one of the following options:
• On – You need to confirm the talkgroup selection by pressing Select or pressing the PTT
button to immediately start a call on a new talkgroup.
• Off – Attaches to the selected talkgroup without any additional prompt.
4.9.14.6
Setting Rotary Knob Function Keys
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup→Rotary Knob→Function Keys.
3 Select one of the following options:
• Auto – Sets the Side buttons according to the Rotary Mode.
NOTE: If the Rotary Mode is set to:
• Dual or Volume – Display shows Auto Selected (OTB), volume can be set
only through Volume Knob.
• Scroll – Display shows Auto Selected (Volume), volume can be set only
through Side buttons.
• Volume Adjust. – Sets the Side buttons to adjust volume level.
• OTB Feature – Sets the Side buttons to the predefined One-Touch Button features.
4.9.15
Default Setting
This sub-menu item resets the radio back to default settings.
4.9.15.1
Selecting Default Setting
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup→Def. Settings.
Your radio display Reset to def. settings?. Press Yes to confirm.
4.10
Group Setup
This menu item allows you to set the operation parameters, scanning and my groups folder.
MN001489A01-BR
Chapter 4 : Main Menu
110
To Next Page
Loading...
