Motorola A1000 - Setting the Screen Brightness; Setting the Screen Calibration; Setting the Volume for System Sounds

64 - Customising Handset Settings
Setting the Screen Brightness
Setting the Screen Calibration
Setting the Volume for System Sounds
Set the volume level for screen taps, button presses, alerts, and
Action
1 Open Control Panel application ( ).
Note: Tap Screen from the Handset tab.
2 Slide the Brightness switch button to the desired setting.
3 Tap
Done .
Action
1 Open Control Panel application ( ).
2 Tap
Screen from the Handset tab.
3 Tap
Calibrate .
4 When prompted, tap the centre of points 1, 2, and 3 to
calibrate the screen.
or
Press the centre of the screen to reset calibration to the
factory default setting.
or
Press
S in any direction to exit without making changes.
5 Tap
Done .
UG.A1000.book Page 64 Wednesday, September 15, 2004 2:35 PM