Getting More Out of Your Handset - 71
Setting Up a USB Cable Connection
Connect the USB cable from the accessory port on the bottom of
the handset to the USB port on the computer.
To complete the connection, tap (
Desktop Suite
)inthe
Application Launcher, then tap
Connect
.
Setting Up a Bluetooth Connection
Using the Desktop Suite
After connecting your handset to the computer, start the A1000
Desktop Suite program on the computer. Refer to the A1000
Desktop Suite online help for more information about using the
program.
Using Remote Synchronisation
The handset allows you to synchronise Calendar, To Do, and
Contract entries over the air (OTA) with a synchronisation server. It
Action
1 Make sure the PC is Bluetooth enabled, then establish a
connection as described on page 69.
2 Open Control Panel application ( )
3 Tap
Connections
tab >
Desktop Suite
.
4 In the
Link using
,fieldtap
Bluetooth
.
5 To select a
Preferred PC
, tap the box next to it, then tap
Done
.
6 To complete the connection, tap (
Desktop Suite
)inthe
Application Launcher and tap
Connect
.
UG.A1000.book Page 71 Wednesday, September 15, 2004 2:35 PM
To Next Page
Loading...
Need help?
General
