Motorola APX Mobile

Advanced Features
English
86
Editing the Alias of a Waypoint
Procedure:
While in the current location display:
1 Press the Menu Select button directly below Optn.
2 > or < (on the keypad mic.) to Waypoints.
3 Press the Menu Select button directly below Sel.
4 D or U to desired waypoints.
5 Press the Menu Select button directly below Optn.
6 D or U to Edit name and press the Menu Select button
directly below Sel.
7 A blinking cursor appears in the Edit Name screen.
Use the keypad to edit the alias.
Press < to move one space to the left.
Press
> to move one space to the right.
Press the Menu Select button below Del to delete any
unwanted characters.
Press * to add a space.
Press 0 to toggle between mixed case mode, uppercase
mode, and lowercase mode.
Press # to toggle between numeric and letter mode.
8 Press the Menu Select button directly below OK once you
are done.
OR
Press the Menu Select button directly below Cncl to return
to the Waypoints main screen.
9 The display shows <Waypoint Name> updated.
10 Press
H or the PTT button (if preprogrammed) to exit this
menu.
Editing the Coordinates of a Waypoint
Procedure:
While in the current location display:
1 Press the Menu Select button directly below Optn.
2 > or < (on the keypad mic.) to Waypoints and press the
Menu Select button directly below Sel.
3 D or U to desired waypoints.
4 Press the Menu Select button directly below Optn.
5 D or U to Edit location and press the Menu Select button
directly below Sel.
6 The first number blinks.
Press < to move to the previous number/coordinates.
Press
> to move to the next number/coordinates.
Press
U or D to change the North (N), South (S), East (E)
or West (W) direction.

