Identifying Radio Controls
English
11
Using the Advance Programmable Buttons
This feature is to help you to shorten the process of applying
certain common features.
* These programmable buttons support the One
Touch Button feature.
(Quick Access) One Touch Button – Enters a menu with a
short press on the preprogrammed One Touch button. Features
assigned to these buttons are Call, Call Alert, Phone, Repeater
Access, MDC RTT Button Access, Status and Message.
Using the Navigation Buttons
Your radio is equipped with navigation buttons. The navigation
buttons will allow you to access the features in the radio.
Up and Down Buttons
By default, the U and D buttons are used as up and down
arrow input.
These buttons are programmable. They can be programmed to
navigate through zones, channels and to increase and
decrease the volume of the radio.
Right and Left Buttons
The > and < buttons mentioned throughout the manual can be
found on the keypad microphone (keypad mic.).
These buttons will allow you to navigate the lists in the radio.
To Next Page
Loading...
Need help?
General
