Advanced Features
English
46
Note: Your radio is preprogrammed with a number of contacts
per Call Lists. Check with your dealer or system
administrator for more information.
If the feature inactivity timer is enabled, your radio
automatically exits the feature when your radio is left
idle long enough for the time to expire. You will hear the
Menu Inactive Exit Tone upon feature exit.
Making a Private Call from Contacts
Note: Your radio must be preprogrammed to allow you to use
this feature.
Procedure:
Use the Options Menu.
1 > or < (on the keypad mic.) to Cnts.
2 Press the Menu Select button directly below Cnts to the
call list. The display shows Contact Alias.
3 D or U to the required subscriber alias.
4 Press the Menu Select button directly below Optn.
5
D or U (on the keypad mic.) to Call and press the Menu
Select button directly below Sel.
6 D or U to select the call type.
7 Hold the microphone vertically 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
8 Press the PTT button to initiate the call. During the call, the
display shows the subscriber alias.
9 Press and hold the PTT button to talk. The LED lights up
solid red.
OR
Release the PTT button to listen. The LED lights up solid
green.
10 If there is no voice activity for a programmed period of time,
the call ends.
OR
The call ends when it reaches the maximum ring time.
OR
Use the PTT button:
1 > or < (on the keypad mic.) to Cnts.
2 Press the Menu Select button directly below Cnts.
3 D or U to the required subscriber alias.
4 Press the Menu Select button directly below Cnts. The
display shows Contact Alias.
5 Hold the microphone vertically 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
To Next Page
Loading...
Need help?
General
