Motorola APX Mobile

Advanced Features
English
100
Stopping SSA Notification of a Single Site Via
Manual Entry
Procedure:
1 > or < to SSA.
2 Press the Menu Select button directly below SSA. The
display shows the Site Alert screen.
3 D or U to Stop Alert and press the Menu Select button
directly below Sel. The display shows the Select Site
screen.
4 D or U to {SiteID Entry} and press the Menu Select
button directly below Edit.
5 The display shows the Enter SiteID screen. Key in the
required Site ID and press the Menu Select button directly
below Send.
6 If a correct Site ID is entered, the display shows the Select
Alert screen.
OR
If a wrong Site ID is entered, the display shows Invalid ID
and prompts to enter the Site ID again.
7 If the request is successful, the display shows Req
successful.
OR
If the single site is not available, the display shows <Site
ID> not available.
OR
If the single site does not exist, the display shows <Site ID>
does not exist.
8 Press the Menu Select button directly below Exit to return
to the Home screen.
9 The SSA Alert for the designated site stops.
Stopping SSA Notification of All Sites
Procedure:
1 > or < to SSA.
2 Press the Menu Select button directly below SSA. The
display shows the Site Alert screen.
3 D or U to Stop Alert and press the Menu Select button
directly below Sel. The display shows the Select Site
screen.
4 D or U to {All Sites} and press the Menu Select button
directly below Send. The display shows Sending req.
OR
If radio is out of range, roaming to a foreign system or in a
failsoft situation, the display shows Req failed.
5 If the request is successful, the display shows Req
successful.
OR
If one or more sites are not available, the display shows Not
all sites available. Repeat Step 3.

