2 Configure Authentication Sources for the device. See “Centralized Authentication Configuration
on RF Site and VPM Devices with VoyenceControl" in the Authentication Services manual.
3 Configure RADIUS parameters for the device. See “Configuring RADIUS on RF Site and VPM
Devices with VoyenceControl” in the Authentication Services manual.
4 Set the Local Cache Size for Centralized Authentication for the device. See “Setting the Local
Cache Size for Central Authentication on RF Site and VPM Devices with VoyenceControl” in the
Authentication Services
manual.
5 Enable/Disable Centralized Authentication for the device. See “Centralized Authentication
Configuration on RF Site and VPM Devices with VoyenceControl” in the Authentication Services
manual.
6 Enable/Disable Centralized Event Logging for the device. See “Enabling/Disabling Centralized
Event Logging on RF Site Devices and VPMs with EMC Smarts” in the Centralized Event
Logging manual.
MN003286A01-E
Chapter
4: GTR 8000 Base Radio Configuration
155
To Next Page
Loading...
