3 External
PTT
Input 5 n/a Key
from Wi-
deband
n/a Dekey
from Wi-
deband
n/a
4 RD
STAT-
RX ACT
RX
Qualifi-
ers Met
n/a Set Out-
put
(1..12)
7 Clear
Output
(1..12)
7
5 Tx In-
hibit
Input 3 n/a TX IN-
HIBIT
n/a TX EN-
ABLE
n/a
6 TRC
Function
Tone
(1..17)
1 Monitor n/a NULL n/a
7 TRC
Function
(1..17)
2 Channel
(1..16)
1 NULL n/a
Key
from
Wireline
n/a n/a n/a
8 LLGT
Detect
n/a NULL n/a Dekey
from
Wireline
n/a
9 T4 if
CH2
Conf
TRC
Function
(1..17)
3 Channel
(1..16)
2 NULL n/a
Key
from
Wireline
n/a n/a n/a
10 T5 if
CH3
Conf
TRC
Function
(1..17)
8 Channel
(1..16)
3 NULL n/a
Key
from
Wireline
n/a n/a n/a
NOTICE: Table configurations are selected from the TABLE parameter. See Figure 126:
CSS - WildCard Tables Example
on page 293 for location of parameter fields.
8 From the menu, select File → Write Configuration To Device.
9 From the menu, select Tools → Disconnect to terminate the connection to the device.
10 Repeat steps 1–7 for all GPW 8000 Receivers.
NOTICE: Only the default WildCard tables are required for the GPW 8000 Receivers.
11 For GPW 8000 Receivers, edit TABLE 2 and change the State and Conditions
from Input 7 to
Input 4.
12 From the menu, select File → Write Configuration To Device.
13 From the menu, select Tools → Disconnect to terminate the connection to the device.
MN003286A01-E
Appendix A: Conventional
GTR 8000 Base Radio Option Kits
300
To Next Page
Loading...
