Clear
Out-
put
(1..12
)
7
10 Click Add
and populate the new WildCard table, as follows:
Wild-
Card
Table
De-
scrip-
tion
States and Condition Actions Inac-
tions
State Value Condi-
tion
State Com-
mand
Value Com-
mand
12 De-
keyed
on Ch
Cur-
rent
Chan-
nel
(1..16)
2 AND
NOT
Station
Keyed
Set
Output
(1..12)
7 NULL
11 Click Add
and populate the new WildCard table, as follows:
Wild-
Card
Table
De-
scrip-
tion
States and Condition Actions Inac-
tions
State Value Condi-
tion
State Com-
mand
Value Com-
mand
13 De-
keyed
on Ch
Cur-
rent
Chan-
nel
(1..16)
1 AND
NOT
Station
Keyed
Clear
Output
(1..12)
7 NULL
12 From the menu, select File → Write Configuration To Device.
13 From the menu, select Tools → Disconnect to terminate the connection to the device.
14 Repeat steps 1–8 for all GPW 8000 Receivers.
NOTICE: Only the default WildCard tables are required for the GPW 8000 Receivers.
15 For GPW 8000 Receivers, edit TABLE 2 and change the State and Conditions
from Input 7 to
Input 4.
16 From the menu, select File → Write Configuration To Device.
17 From the menu, select Tools → Disconnect to terminate the connection to the device.
MN003286A01-E
Appendix
A: Conventional GTR 8000 Base Radio Option Kits
309
To Previous Page
Loading...
