RADIO OVERVIEW
4
Connecting an Audio Accessory
Connect the wired audio accessory or pair with a
wireless accessory (select models only).
1. Turn the radio OFF.
2. Remove the accessory connector cover
(applicable on bluetooth enabled models only).
3. Plug the audio accessory straight into the
accessory connector on the radio. Screw the
audio accessory plug into the connector until it
is tight and fully engaged with the connector.
4. Turn the radio ON. Press either the Battery
Status, Menu or Volume Control button to
check for audio through the audio accessory.
Note: The CLP Series radios offer a variety of audio
accessories. For detailed Audio Accessories List,
please refer to www.motorola.com/CLP for
information on approved accessories. Lower the
radio volume BEFORE placing the audio accessory
in or near your ear.
To Next Page
Loading...
Need help?
General
