Motorola CLP series

RADIO OVERVIEW
8
Selecting a Channel
For CLP1040 multi-channel models only:
• When powered ON, press the Menu button, you
will hear the voice prompt:
• [Color] “Channel” – [Channel#] – “To change” –
“press +/-”
• Select the channel you want. The LED will reflect
the color of the new channel. Press PTT button to
confirm or it will be active after 3 second hang
time.
Table 2: Default Channel Settings for CPS
CLP1010 Single-Channel
Models
CLP1040 Multi-Channel
Models
Channel
LED
Status
Color Channel
L ED
Status
Color
1
Red
1
Red
2
Green
3
Orange
4
Blue