Motorola CLP series

13
BATTERY AND CHARGER
FEATURES
Charging the Battery
To charge the battery (with the radio attached):
1. Place it in a Motorola-approved Drop-in Tray
Single Unit Charger or Drop-in Tray Multi Unit
Charger.
Note: When acquiring additional chargers or power
supplies, make sure you have similar drop-in tray
chargers and power supplies sets. For part number
details, refer to “Chargers” Section on page 41.
Estimated Charging Time
The following table provides the estimated charging
time of the battery.
For further details, see “Batteries” Section on page 41.
Charging a Standalone Battery
To charge only the battery:
1. Insert the battery into the tray, with the inside
surface of the battery facing the front of the
charger, as shown.
2. Ensure the slots in the battery correctly engage
in the charger.
Estimated Charging Time
Charging
Solution
Battery Type
Standard Li- Ion
Battery
High Capacity
Li-Ion Battery
Standard
Charging
Solution
2.5 hours 3.5 hours