BATTERY AND CHARGER
FEATURES
14
Charging with the Drop-in Tray
Single Unit Charger (SUC)
1. Place the drop-in tray charger on a flat surface.
2. Insert the connector of the power supply into the
Micro USB port on the front of the drop-in tray
charger.
3. Connect the correct power supply to a proper
AC outlet.
4. Insert the radio into the tray, making sure the
charging contacts on the charger are aligned
with the contacts on the radio.
Note: When charging a battery attached to a radio, turn
the radio OFF to ensure a full charge. The radio will
fit in the charger with the holster attached when
placed face down in the tray.
Charging with the Drop-In Tray
Multi-Unit Charger (Optional
Accessory)
The Multi-Unit Charger (MUC) allows drop-in
charging of up to 6 radios. Each of the 6 charging
pockets can hold a radio (with battery installed).
The Multi-Unit Charger provides pockets for
headset storage.
1. Place the charger on a flat surface or mount it
on the wall.
2. Insert the power cord plug into the jack on the
MUC.
3. Plug the cord into an AC outlet and then into
charger.
4. Turn the radio OFF.
To Next Page
Loading...
Need help?
General
