Motorola CLP series User Manual

RADIO OVERVIEW
6
5. Turn the belt clip to the position as needed.
Note: The CLP Series radios offer a variety of flexible
carrying accessories. For detailed Carrying
Accessories List, please refer to
www.motorola.com/CLP for information on
approved accessories.
TRANSMITTING AND RECEIVING
1. To talk, press and hold the PTT button on the
front of the radio (or on select wired audio
accessories with an inline PTT). Speak clearly
into the microphone on the audio accessory.
When finished talking, release the PTT to listen.
2. To receive, listen through the earpiece at the
volume level you have set. Press the PTT to
respond.
Note: The CLP Series radios always require the use of an
audio accessory with microphone and speaker.
Table 1: Talk Range
Industrial Multi-Level
Inside steel/concrete
industrial buildings
Inside Multi-Level
Buildings
Up to 160,000 square
feet
Up to 12 floors

Motorola CLP series Specifications

General

Brand	Motorola
Model	CLP series
Category	Two-Way Radio
Language	English