Motorola CLP1013 - MENU AND SETTINGS OPERATION; Operation with Menu Settings

RADIO OVERVIEW
English
8
OPERATION WITH MENU SETTINGS
Press Menu button to navigate through the Menu settings. Voice Assisted Operation feature may
not be available on certain previous shipping models. At any time in Menu mode, short press PTT or
wait 3 seconds to exit the menu.
HOW TO... STEP 1 STEP 2
Change Channel
Press Menu button to navigate to
Channel.
Press +/- button to change
channel.
Enter Monitor Mode
Press Menu button to navigate to
Monitor.
Press +/- button to activate
or deactivate Monitor.
Enter Scan Mode
Press Menu button to navigate to
Scan.
Press +/- button to activate
or deactivate Scan.
Send Call Tone (enabled
through CPS)
Press Menu button to navigate to
Call Tone.
Press +/- button to send
Call Tone.
Quick Tip: It is not necessary to wait for the voice prompt to be completed before continuing with next button
press.
Note: For single channel models, Monitor, Scan Mode and Call Tone are supported. Single channel models
support Scan Mode when the user enables “Dynamic Talkaround Scan” on a repeater channel via the
customer programming software.