Motorola CLP1013 - CHARGING RADIO WITH SINGLE UNIT CHARGER; CHARGING RADIO WITH MULTI-UNIT CHARGER

BATTERY AND CHARGER
FEATURES
English
16
Charging the Radio with the Drop-in
Tray Single Unit Charger (SUC)
1. Place the drop-in tray charger on a flat
surface.
2. Insert the connector of the power supply into
the Micro USB port on the front of the drop-in
tray charger.
3. Connect the correct power supply to a proper
AC outlet.
4. Insert the radio (with battery installed) into the
tray, facing down and making sure the charging
contacts on the charger are aligned with the
contacts on the radio.
Note: When charging a battery attached to a radio, turn
the radio OFF to ensure a full charge. The radio will
fit in the charger with the holster attached when
placed face down in the tray.
Charging with the Drop-In Tray
Multi-Unit Charger (Optional
Accessory)
The Multi-Unit Charger (MUC) allows drop-in
charging of up to 6 radios. Each of the 6 charging
pockets can hold a radio (with battery installed).
The Multi-Unit Charger provides pockets for
headset storage.
1. Place the charger on a flat surface or mount
it on the wall.
2. Insert the power cord plug into the jack on
the MUC.