Motorola CM360 User Guide

21
English
RADIO CALLS
Keypad Edit (keypad microphone only)
The direct access button from the keypad
microphone takes you to the List option only. The
last person called from the list is displayed. Note
that the last multicall or keypad entry is not shown.
Note: If you enter an incorrect address, you must
exit the menu (either by selecting the present
entry or allowing the menu to time out), then
re-enter the contact list via the programmed
button on the keypad microphone.
Once the desired name or address is displayed,
there are three methods to select the entry :
Method 1
Method 2
Method 3
Press the PTT button or Call 1-4 to select address
and make the call.
Call1-4 are pre-programmed call buttons.
1 Press Mic {, } or | whichever is
programmed as Contact list /keypad entry.
2 The last selected list
entry is displayed
e.g.
3 Either G or H
until required entry
e.g..
or Enter address digits
directly on
microphone keypad
e.g.
JOHN
PHIL
5234
1 Long press on C To confirm selection
2 Display shows:
(for 2 seconds)
1 Press # on the
keypad
(if programmed)
To confirm selection
2 Display shows:
(for 2 seconds)
SELECTED
SELECTED

Motorola CM360 Specifications

General

Brand	Motorola
Model	CM360
Category	Radio
Language	English