3 INSTALLATION
21
2. Use the remote control or the cursor keys on the front panel to navigate the
on-screen menus:
• Press the ▲ and ▼ keys to highlight the setting you wish to change.
• Press the ► key to select an option.
• To exit the setting and move to another setting, press the ▲ or ▼ key.
If the User Settings menu does not display on the HDTV screen, the TV may not
support the default video output setting. Use the front panel display to adjust the
settings as described in “There is no video on the TV screen” in the Troubleshooting
section.
The User Settings menu options are:
Setting Description
TV Type Allows you to specify the style of television connected to the DCH receiver. Options
include 16:9, 4:3 LETTERBOX, and 4:3 PAN SCAN. By default, the 16:9 option is
selected. The options are used as follows:
• 16:9 designates that a widescreen television is connected to the DCH
receiver.
• 4:3 LETTERBOX designates that a standard screen television is connected to
the DCH receiver and that widescreen programs should be scaled to fit the
screen with black bars above and below the picture.
• 4:3 PAN SCAN designates that a standard screen television is connected to
the DCH receiver and that widescreen programs should be cropped so that
the picture fills the entire screen.
To Next Page
Loading...
Need help?
General
