Motorola DP2600E - 3.3.9 Battery Check Test Mode; 3.3.10 Button;Knob;PTT Test Mode

Transceiver Performance Testing Display Model Test Mode 3-9
3.3.9 Battery Check Test Mode
1. Press and hold Side Button 1 after Audio Loopback Earpiece Test Mode. The radio beeps
once and momentarily displays “Battery Check Test Mode”.
2. The radio will display the following:
Figure 3-2. Battery Check Test Mode Display
3.3.10 Button/Knob/PTT Test Mode
1. Press and hold Side Button 1 after Battery Check Test Mode. The radio beeps once and
displays “Button Test”(line 1).
2. Rotate the Volume Knob; “2/1” through “2/255” appears. The radio beeps at each position.
3. Rotate the Channel Knob; When rotate the channel knob in clockwise, “4/1” appear. When
rotate the channel knob in counter clockwise, “4/-1” appear. The radio beeps at each position.
4. Press Side Button 1; “96/1” appears & radio beeps; release, “96/0” appears & radio beeps.
5. Press Side Button 2; “97/1”appears & radio beeps; release, “97/0” appears & radio beeps.
6. Press the PTT Switch; “1/1” appears & radio beeps; release, “1/0” appears & radio beeps.
7. Keypad Checks:
- Press P1, “160/1” appears & radio beeps; release, “160/0” appears & radio beeps.
- Press P2, “161/1” appears & radio beeps; release, “161/0” appears & radio beeps.
- Press MENU, “139/1” appears & radio beeps; release, “139/0” appears & radio beeps.
- Press BACK, “129/1” appears & radio beeps; release, “129/0” appears & radio beeps.
- Press
, "128/1" appears & radio beeps; "128/0" appears & radio beeps.
- Press
, "130/1" appears & radio beeps; "130/0" appears & radio beeps.
- Press OK, "85/1" appears & radio beeps; "85/0" appears & radio beeps.
Rem. Capacity100%