Disassembly/Reassembly Procedures Radio Reassembly - Detailed 5-25
7. Hold up the UC-audio flex and insert the display retainer. Screw in the K18 screw to the
speaker retainer.
Figure 5-33. Speaker retainer reassembly
8. Connect the UC-audio flex to the keypad board and gently press the ZIF connector until it
latches shut.
9. Affix a poron pad on top of the UC-audio flex.
Figure 5-34. UC-Audio Flex Pad Reassembly
NOTE
Ensure the UC-audio flex is not trapped under the speaker retainer.
To Next Page
Loading...
