26
nextel.com
Phone Programming
NOTE: You may want to read “Pause Digit Entry” on page 27 and
“Plus Dialing” on page 35 before you create a stored list.
Using Pause Digit Entry and Plus Dialing will enable you to
create stored lists that will save time when placing calls.
Storing Names and Numbers
This programing function allows you to store up to 100 names, phone
numbers and Private ID numbers. Your i550plus phone will
automatically assign the next available Speed Dial number, which you
can change. Once you have stored an individual, you can call them by
scrolling through the list and finding their name, using the Speed Dial
number or using Nextel Direct Connect (see “Nextel Direct Connect®”
on page 71). And, whenever the person calls you, your phone will
display their name if you entered their 10-digit phone number. The
display holds 12 phone-number characters. If the phone number exceeds
12 characters, you can pressounder “More” to see the remaining
characters. To return to the start of the number, pressounder
“Numbr.”
You can store up to 100 names, phone numbers and Private IDs using
the following steps:
1
Press * then # then 2 then 0.
2
The message: 20=Phone / Prvt List displays. Pressounder
“Ok.” Another message will display with the remaining number
of slots available. The phone will then display the Enter Name
screen.
To Next Page
Loading...
