Placing Private Calls
73
Placing Private Calls
From Private mode, there are two ways to reach an individual using
Nextel Direct Connect.
Entering the Private ID
SelectingaNamefromaStoredList
NOTE: See“Creating, Editing and Using Stored Lists” on page 25.
Receiving Private Calls
When you receive a Nextel Direct Connect Private call, your phone will
automatically switch to Private mode. You will hear a chirp indicating
1
Press m until you see Prvt Ready.
2
Enter the Private ID.
3
Press and hold the Push-To-Talk button on the side of the phone
to talk. Both phones will chirp before your voice can be heard.
4
Release the Push-To-Talk button to listen.
1
Press m until you see Prvt Ready.
2
Press lr to scroll through the names.
Or, press n until “Name” appears. Pressounder “Name”
and enter the first initial of the name then press lr to scroll
through the names.
3
Press and hold the Push-To-Talk button on the side of the phone
to talk. Both phones will chirp before your voice can be heard.
4
Release the Push-To-Talk button to listen.