MODEL SPECIFICATIONS
MODEL SPECIFICATIONS
GENERAL RECEIVER
TRANMITTER
FCC Designation: IHDT56KQ1
Receiver Type
Direct Conversion
Transmitter Type Single Conversio
Operational Modes Phone
Frequency Range 851-870 MHz Frequency Range 806-825 MHz
Private
935-940 MHz 896-901 MHz
Group
Circuit Data
Packet Data
Temperature Range
Channel Spacing: Emission Designator 18K3D7W
Operating
–10°C to –60°C
iDEN
25kHz
Storage (w/o battery) –40°C to +85°
Frequency Stability Modulation Type Quad 16QAM
Battery Type Lithium Ion Referenced to base Quad 64QAM
station 0.4 ppm Quad QPSK
Recommended Sensitivity (10%)BER Frequency Stability:
Battery (M-16 QAM) -111 dBm Referenced to base
Standard Battery SNN5823 Station 0.4 ppm
Spurious Emissions:
Battery Voltage Spurious Response Conducted -13 dBm
Nominal 3.7 Vdc Immunity: -51 dBm Radiated -13 dBm
Range 3.0 to 4. 2 Vdc
Dimensions (HxWxD) Spurious Radiation RF Pulse Avg Power:
100.0 x 52.5 Above 960 MHz <500μV/m iDEN (dynamically
w/Standard Battery x 18.0 mm 216–960 MHz
<200μV/m
adjusted) -6 to +28 dBm
88–216 MHz
<150μV/m
30–88 MHz
<100μV/m
Weight: Audio Output Power Adjacent Channel
With standard battery 125.0 g &Speakerphone Rating Power
(Private and Group iDEN (at ±25 kHz in -55 dB
Modes only) into 18 kHz BW)
Volume 67.0 cc 8 ohms at maximum
volume (nominal
battery voltage) 500mW
Distortion at Rated
Audio:
Electrical Acoustical 5% Max
Acoustical 10% Max
All Specifications +/- 5%
x
To Next Page
Loading...
