Motorola i897 - Legal and Safety; Safety, RF Exposure, and Compliance

TROUBLESHOOTING: Model Assembly (MA) Test Mode Test
Model Assembly (MA) Test Mode Test (cont.)
Next
Insert formatted
SD card
Remove SD
Ok
SIM absent
Power Off
Cover the
photosensor from
light and press OK
key to advance.
Insert SD card
when see “insert
formatted SD card”.
SDread/writes/erase
test pass,instruct
user to remove the
SD card. Remove
the SD card to
continue.
The radio will
detect if a SIM has
been placed in the
radio and report the
result on the
display. If SIM card
absent, power off
the radio
.If the photosensor
fail to function or
user didn’t follow
the instruction, this
screen will appear
for retest.
EMU Audio test
Generating Tone on
Left Channel
AUDIO LV=0x1bf5
Test Passed
Generating Tone on
Right Channel
AUDIO LV=0x1b35
Test Passed
Press PTT button.
EMU Audio test
FAIL
Keypad test OK
Power OFF
After pass,diplay
show
“Keypad test
OK”， Tht test
completed, press
power off to exit the
MA mode.
EMU Audio test”
displayed. A tone is
generated
automatically.
If pass, the radio
should then display
the audio value of
the left, right
channel.
If fail, press power
key to exit MA test
mode.
Display all keys (i.e.
1, 2, 3, Menu, #, *,
etc) on display. As
each key is pressed,
the number
disappears from the
display. When all
the keys are pressed,
proceed to next test.
Close the flip
proceed.
6880401P59-O
113