December 2, 2003 6881096C46-O
2-4 Operation: Power-Up Feature
2.8 Power-Up Feature
2.8.1 Siren State
The Siren/PA Accessory powers up in one of two ways:
• Warm Start (battery power was not removed)
• Cold Start (battery power was removed).
2.8.2 DEK-Plus
In a Warm Start with a DEK-Plus, the Siren will power up with the PA Volume, the siren tone, and the
Siren On/Off in their previously selected state at power-down, and with the PA off.
NOTE: In a Warm Start with the DEK-Plus, the CPS may be used to program whether or not the Siren
ON/OFF powers up in its previous state. This feature can be disabled, causing the Siren/PA
to always power up with the Siren off.
In a Cold Start, with a DEK-Plus, the Siren will power up with the default PA Volume, the Wail tone,
the PA off, and the Siren off.
To Next Page
Loading...
Need help?
General