EasyManua.ls Logo

Motorola MTM800 FuG

Motorola MTM800 FuG
158 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TXI Mode – Select Activate to stop sending any radio transmission.
NOTICE: If the radio is in TXI Mode, it is not possible to switch from Direct Mode to
Trunked Mode or Repeater Mode, or Gateway Mode.
TG Net Sel – Selects one or multiple networks determined by the selected talkgroup.
4.15.2
Network Select
This sub-menu item allows you to select a network to register your radio. Network Sel is available only
in TMO or Gateway mode, otherwise your radio display Service Restricted message.
4.15.2.1
Selecting Your Network
Procedure:
1 From the home screen, press the Menu key.
2 Select NetworksNetwork SelHome Only.
Your radio registers to the home network.
4.15.2.2
Using Select Net Registration
Procedure:
1 From the home screen, press the Menu key.
2 Select NetworksNetwork SelSelect Net.
3 Select the required network from the list.
Your radio registers to the selected network.
4.15.2.3
Using Any Network Registration
When and where to use: Your radio has lost its home network coverage and wants to increase the
number of networks it can scan and register.
Procedure:
1 From the home screen, press the Menu key.
2 Select NetworksNetwork SelAny Network.
Your radio selects and registers to the network automatically from the predefined list.
68015000585-MF
Chapter 4: Main Menu
114

Table of Contents

Other manuals for Motorola MTM800 FuG

Related product manuals