If… Then…
• Sent
• Delivered
• Read
• Expired and undelivered
• Expired and unread
• Failed due to an unknown error,
NOTICE: This option is only appli-
cable for the outbox.
If you want to protect the message and
avoid deleting or overwriting it,
select Protect.
If you want to remove the protection of
the message,
select Unprotect.
NOTICE: Message protection is
enabled in the inbox and Call Out
inbox. You can only delete unpro-
tected messages.
4.3.2.4
Embedded Number
The Embedded Number feature allows you to call a number embedded in the message in the Inbox or
Outbox folder. You can also start a group call with the message sender of a talkgroup.
4.3.2.5
Storing Numbers from Messages
Prerequisites: Embedded Number feature is enabled by your service provider.
When and where to use: You can save the number of the sender or embedded number from the
message to a new or existing contact.
Procedure:
1 From the home screen, press the Menu key.
2 Select Messages → Inbox.
3 Highlight the required message and select Read.
4 Press the PTT button.
5 Radio displays a list of the numbers (including the senders number).
6 Highlight the required number and press Store.
7 Highlight required contact and press View.
NOTICE: To store a number for a new contact, select [New Contact] and fill out the
required fields. Press Done to save it.
8 Select Edit.
9 Choose the Type of the new number and press Done.
68015000585-MF
Chapter 4: Main Menu
71
To Next Page
Loading...
