Motorola MTM800 FuG

4 Perform one of the following actions:
If… Then…
If you want to send the message to a talk-
group,
select the required talkgroup from the Talk-
Group List.
If you want to send the message to an
address in your contact list,
perform the following actions:
a Press abc.
b Select the name of the recipient.
If you want to send the message to a
contact or talkgroup that is not config-
ured in the radio,
perform the following actions:
a Enter the contact number.
b Press Send.
4.3.7.2
Managing User-Defined Templates
Procedure:
1 From the home screen, press the Menu key.
2 Select Messages → Templates.
3 Highlight the required template and press Menu.
4 Select one of the following options:
If… Then…
If you want to view the template, select View.
If you want to delete the template, select Delete.
If you want to edit the template, perform the following actions:
a Select Edit Text.
b Edit the text.
c Depending on the requirement, press the
Menu key and do one of the following:
• To save the edited template, select
Save Changes.
• To save the edited template as a new
template, select Store.
If you want to edit the name of the tem-
plate,
perform the following actions:
a Select Edit Name.
b Edit the template name and press Ok.
4.3.8
Predefined Templates
Predefined message templates are programmed into your radio.
You are allowed to perform limited edit operations on the predefined template. You can send it, but you
cannot store the edited template or erase it from the predefined template list.
68015000585-MF
Chapter 4: Main Menu
75