2 Select iTAPEnglish and press Back.
3 Press Menu→Entry Mode.
4 Select Primary.
5 Press 3 key.
The alternative row opens and shows D E F 3.
6 Continue entering the letters by pressing one key for each letter. Press 2, 8, 4, and 3 keys.
NOTICE: Automatic shift to upper case is used at the beginning of a message, after
punctuation followed by space, or for the first letter of a word created as a new contact
entry.
The alternative row highlights David.
7 Press * key.
8 Press 2 key and scroll the alternative row by pressing Right Navigation key to reach 2.
It automatically changes the entry mode to Numeric.
9 Press 3 and 2 keys.
10 Press and hold 1 key until 0 at the end changes to ..
The alternative row highlights 232..
11 Scroll the alternative row by pressing the Right Navigation key to reach the required symbol.
12 Press Select.
You have entered David 232!.
2.5.6
Writing in TAP Alphanumeric
Prerequisites:Your radio displays the text entry screen.
Procedure:
1 Press Menu→Entry Setup→Seco..
2 Select TAPEnglish and press Back.
3 Press Menu→Entry Mode.
4 Select Secondary.
5 Press the key labeled with the desired character, once for the first character, twice for the
second, and so on.
Example: To enter letter s, press 7 key four times. To enter number 7, press the 7 key five times. If
you do not press a key for a few seconds, the character is accepted, and the cursor moves to the next
position.
2.5.7
Word Locking
Prerequisites:Your radio displays the text entry screen.
68015000899-FH
Chapter 2: Getting Started
29
To Next Page
Loading...
