2.14
Entering TMO or DMO Mode
Procedure:
1 From the home screen, press Options.
2 Select Trunked Mode/Direct Mode.
2.15
Over The Air Programming
NOTICE: This is a Software Selling Feature.
Over The Air Programming (OTAP) enables remote radio reconfiguration over TETRA network.
Prerequisites:Your radio display shows an OTAP prompt with Reboot required. Accept new
configuration? text for a new configuration update.
Procedure:
1 Select Yes to accept or No to reject the new configuration update.
NOTICE: A timer is set when the prompt is displayed. Request is automatically rejected if
there is no user response to the prompt when the timer runs out.
When the OTAP installation prompt is accepted, your radio updates with the new configuration as
received over OTAP. Visible indication guidance and update status is provided during the update.
When the OTAP installation prompt is rejected, your radio returns to idle mode.
2.16
One-Touch Buttons
The One-Touch Button (OTB) feature allows you to activate a feature by a long key press of the
programmable button. Your service provider can also assign one-touch functions to the keypad keys.
NOTICE:
The One-Touch Button and One-Touch Dial are mutually exclusive features.
Table 13: One-Touch Button Features
Feature Description
Activation of Covert Mode Turns Covert Mode on or off.
Add Bluetooth Device Activates scanning for Bluetooth devices.
Any Network Selects any network.
Any Talkgroup Network Selects any talkgroup network.
Bluetooth Smart Proximity
Pairing
Activates scanning for Bluetooth Smart Proximity Pairing.
Change Audio Profile Changes to the specific audio profile.
Change Talkgroup Changes the talkgroup to the one programmed by your service pro-
vider.
Disconnect All Connected
Bluetooth Devices
Disconnects all Bluetooth devices connected to the radio.
68015000899-FH
Chapter 2: Getting Started
40
To Next Page
Loading...
