Motorola MTP3250 - Set Volume; Setting Volume; Language; Setting Language

• DMO Simplex – To set the new ring style to all Direct Mode Operation (DMO) simplex calls.
NOTICE: Upon entry into this sub-menu, the display shows the current ring style used.
4 Scroll to the desired style and press Select.
NOTICE: New ring style is played immediately for a few seconds. If necessary, adjust the
volume level.
4.8.2
Set Volume
This menu item allows you to adjust the Speaker and Earpiece tone volumes.
4.8.2.1
Setting Volume
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup→Set Volume.
3 Select Speaker or Earpiece.
4 Select one of the following options:
• Voice Vol – Sets the volume level for voice.
• Duplex Vol – Sets the volume level for duplex ringtones.
• Simplex Vol – Sets the volume level for simplex ringtones.
• Keypad Vol – Sets the volume level for keypad tones.
• Tones Vol – Sets the volume level for alert tones.
• Call-Out Vol – Sets the volume level for Call-Out tones (if enabled).
NOTICE: If the display shows only one option Volume, you can adjust all of the above
settings at once. You have the option to change the settings individually when the
Volume Adj. Mode is set to Individual.
5 Press Right or Left Navigation key to change the value.
NOTICE: When the battery level is low it is not recommended to attach the 4 Ω speaker
to the radio as it can cause reset or shutdown of the radio.
4.8.3
Language
This sub-menu allows you to change the language of the radio.
4.8.3.1
Setting Language
Prerequisites:The list of available languages is set by service provider.
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup→Language.
3 Select desired language.
68015000899-FH
Chapter 4: Main Menu
94