Motorola Professional Series

26
English
GETTING STARTED
To select a zone:
Note:The selection of zones can be programmed by
your dealer either on the Selector knob or via
the Menu.
Use the Zone/Channel/Menu Selector knob to
select the appropriate Zone.
–or–
SELECTING A CHANNEL OR
TALKGROUP
Your radio offers up to 160 channels (10 zones
of 16 channels each) and up to 15 LTR zones
with 16 talkgroups each.
Note: Due to government regulations, some
channels may not be programmed. Ask
your dealer for more information.
To select a channel or talkgroup:
1
) to enter Menu Mode.
2
m until
3
) to select
4
m until you see the desired zone.
5
) to select the desired zone.
Zone
Zone
1 Select the appropriate zone, if required
(“Selecting a conventional or trunked zone”
see page 25).
2
Depending how it was programmed by your
dealer, turn the Channel/Talkgroup/Zone or
Menu Selector knob clockwise or
counterclockwise until you reach the desired
channel/talkgroup.
–or–
1
) to enter Menu Mode.
2
m until
3
) to select
CHANNEL/TKGP
CHANNEL/TKGP
03_GettingStarted.fm Page 26 Wednesday, August 3, 2005 3:23 PM
All manuals and user guides at all-guides.com