32
English
RADIO CALLS
SENDING A STATUS
This feature enables you to send a status
update to the base. The status feature makes
more efficient use of the channel compared to
voice transmissions. Status updates of up to
14 characters may be programmed by your
dealer.
To send a Status:
7 Press the PTT button.
You see
8 If the Call Alert page is received,
you see
If not received,
you see
9 ( to return to
–or–
Hold down ( to exit Menu Mode.
Call in Prog
Acknowledge
No Acknowledge
Radio Check
1 ) to enter Menu Mode.
2 m until
3 ) to select
4 m to locate the desired status in the
preprogrammed list.
–or–
Press the button that has been
preprogrammed for a specific status to jump
to and select from the list shown on the
display.
For example, pressing 2,
you see:
Status
Status
Status
Loc 2
04_Radio_Calls.fm Page 32 Wednesday, August 3, 2005 3:21 PM
To Next Page
Loading...
