28
English
GETTING STARTED
RECEIVING A TRUNKED OR
CONVENTIONAL CALL
4
Press and hold the PTT button.
–or–
Press and release the PTT button and wait 3
seconds.
• If access to the trunked system was
successful, the LED indicator lights steady
red.
- In addition, your dealer can program
your radio to sound a short, high-
pitched (talk permit) tone, indicating
successful trunked system access.
• If access to the trunked system was
unsuccessful, the LED indicator flashes
red and a low-pitched (talk prohibit) tone
sounds, indicating that the system was
busy or out-of-range.
5
With the PTT button depressed, speak clearly
into the microphone.
6 Release the PTT button to listen.
1
Turn your radio on.
2
Adjust your radio’s volume (see page 25).
3
Select the desired trunked or conventional
zone (see page 25 ”Selecting a Zone”).
• Make sure the PTT button is released.
4
Listen for voice activity. The LED indicator
flashes red when your radio is receiving.
03_GettingStarted.fm Page 28 Wednesday, August 3, 2005 3:23 PM
To Next Page
Loading...
